Jump to content
Chloe Neo

DS Emulator ?

Recommended Posts

Does anyone have a safe, virus free DS Emulator I could download, like provide me with a link or something as well as an fe 12 English patch as I'm a bit a noob with this sort of stuff.

Share this post


Link to post
Share on other sites

No$GBA and Desmume both work in my experience. Desmume can bypass anti-piracy conditions, but I don't know of any in FE12 so both should be fine.

The translation patch page on the main site has a link to the translation.

Share this post


Link to post
Share on other sites

http://www.nogba.com/ - No$GBA, Really good.

http://desmume.org/ - Desmume Emulator. Personal Favorite.

http://serenesforest.net/wiki/index.php/Heroes_of_Light_and_Shadow_Translation - Translation Patch. The download option is on the right side. Download and unzip the file. Inside, you may have to dig around, there's an instruction textfile. But patching it is pretty simple, you use a .bat file(I think) named Drag Clean Rom here. You drag the clean rom over it, and it does the rest.

http://serenesforest.net/forums/index.php?showtopic=53601- Gradivus' post. Save file with H4 unlocked, male class sets unlocked, and the three DLC items.

Edited by eclipse
snip snip snip

Share this post


Link to post
Share on other sites

dsmume's site appears to be broken (there is a source forge page open, and source forge's now owner stopped bundling adware as of this week.) . nocash's site is up though: http://problemkaputt.de/gba.htm

Share this post


Link to post
Share on other sites

I played FE12 for a JP DS and it wasn't hard at all to play without any JP knowledge.

Of course I didn't understand the story, but the battles worked for me, because I could indentify the icons of the weapons and items and read the numbers.

Share this post


Link to post
Share on other sites

Desmume can be a bit laggy for most of the games (in my case at least). Idk if there's a solution for it though.

Share this post


Link to post
Share on other sites

Is there any emulator for android that works with FE12? I use Drastic DS

Drastic works with FE12 and it works well for me, though some times getting it to start can be a bit weird

Share this post


Link to post
Share on other sites

Drastic works with FE12 and it works well for me, though some times getting it to start can be a bit weird

Do you have a direct download link for the 100% version. The link I try does not work on my Drastic

Share this post


Link to post
Share on other sites

Dynamic recompiler.

I thought it used Dynarec by default. (Dynamic JIT)

Anyway, Desmume is quite cpu-intensive.

Edited by Naughx

Share this post


Link to post
Share on other sites

Desmune sucks the lag and hyperspeed I cant dealt with I just when and got one called Na$gba emulator plays Fe 12 like a dream

Share this post


Link to post
Share on other sites

Desmune sucks the lag and hyperspeed I cant dealt with I just when and got one called Na$gba emulator plays Fe 12 like a dream

It's your computer. As Naughx said, DeSmuMe is processor-taxing, and will require higher specs to run smoothly. But that's because DeSmuMe is more accurate (read: running closer to the DS hardware) than No$GBA, and emulating consoles accurately requires more CPU-usage.

Share this post


Link to post
Share on other sites

It's your computer. As Naughx said, DeSmuMe is processor-taxing, and will require higher specs to run smoothly. But that's because DeSmuMe is more accurate (read: running closer to the DS hardware) than No$GBA, and emulating consoles accurately requires more CPU-usage.

its a windows 10 laptop I cant see how that would hinder its performance

Share this post


Link to post
Share on other sites
Posted (edited) · Hidden by eclipse, February 13, 2016 - The second ROM warning!
Hidden by eclipse, February 13, 2016 - The second ROM warning!

You can get a prepatched rom on nicoblog

Edited by Megakoopax

Share this post


Link to post

I had to turn it on manually, I dunno if that changed.

Well I'm using the compiled dev svn builds, but the Windows build should still use Dynarec JIT instead of Interpreter.

[spoiler=CLI help output]Usage:

desmume [OPTION...]

Help Options:

-h, --help Show help options

--help-all Show all help options

--help-gtk Show GTK+ Options

Application Options:

--load-type=LOAD_TYPE ROM loading method, 0 - stream from disk (like an iso), 1 - load entirely to RAM (default 0)

--load-slot=NUM Loads savestate from slot NUM

--play-movie=PATH_TO_PLAY_MOVIE Specifies a dsm format movie to play

--record-movie=PATH_TO_RECORD_MOVIE Specifies a path to a new dsm format movie

--start-paused=START_PAUSED Indicates that emulation should start paused

--cflash-image=CFLASH_IMAGE Requests cflash in gbaslot with fat image at this path

--cflash-path=CFLASH_PATH Requests cflash in gbaslot with filesystem rooted at this path

--gbaslot-rom=GBASLOT_ROM Requests this GBA rom in gbaslot

--bios-arm9=BIOS_ARM9_PATH Uses the arm9 bios provided at the specified path

--bios-arm7=BIOS_ARM7_PATH Uses the arm7 bios provided at the specified path

--bios-swi=BIOS_SWI Uses SWI from the provided bios files

--spu-mode=SPU_MODE Select SPU Synchronization Mode. 0 - Dual SPU Synch/Asynch (traditional), 1 - Synchronous (sometimes needed for streams) (default 0)

--spu-method=SPU_SYNC_METHOD Select SPU Synchronizer Method. 0 - N, 1 - Z, 2 - P (default 0)

--spu-advanced=SPU_ADVANCED Uses advanced SPU capture functions

--num-cores=NUM_CORES Override numcores detection and use this many

--scanline-filter-a=SCANLINE_FILTER_A Intensity of fadeout for scanlines filter (topleft) (default 0)

--scanline-filter-b=SCANLINE_FILTER_B Intensity of fadeout for scanlines filter (topright) (default 2)

--scanline-filter-c=SCANLINE_FILTER_C Intensity of fadeout for scanlines filter (bottomleft) (default 2)

--scanline-filter-d=SCANLINE_FILTER_D Intensity of fadeout for scanlines filter (bottomright) (default 4)

--rigorous-timing=RIGOROUS_TIMING Use some rigorous timings instead of unrealistically generous (default 0)

--advanced-timing=ADVANCED_TIMING Use advanced BUS-level timing (default 1)

--slot1=SLOT1 Device to mount in slot 1 (default retail)

--slot1-fat-dir=SLOT1_DIR Directory to scan for slot 1

--depth-threshold=DEPTHTHRESHOLD Depth comparison threshold (default 0)

--console-type=CONSOLETYPE Select console type: {fat,lite,ique,debug,dsi}

--advanscene-import=ADVANSCENE_IMPORT Import advanscene, dump .ddb, and exit

--cpu-mode ARM CPU emulation mode: 0 - interpreter, 1 - dynarec (default 1)

--jit-size ARM JIT block size: 1..100 (1 - accuracy, 100 - faster) (default 100)

--disable-sound Disables the sound emulation

--disable-limiter Disables the 60fps limiter

--nojoy=NOJOY Disables joystick support

--autodetect_method=AUTODETECT_METHOD Autodetect backup method (0 - internal, 1 - from database)

--3d-engine=ENGINE Select 3d rendering engine. Available engines:

0 = 3d disabled

1 = internal rasterizer (default)

2 = opengl

--save-type=SAVETYPE Select savetype from the following:

0 = Autodetect (default)

1 = EEPROM 4kbit

2 = EEPROM 64kbit

3 = EEPROM 512kbit

4 = FRAM 256kbit

5 = FLASH 2mbit

6 = FLASH 4mbit

--fwlang=LANG Set the language in the firmware, LANG as follows:

0 = Japanese

1 = English

2 = French

3 = German

4 = Italian

5 = Spanish

--timeout=SECONDS Quit DeSmuME after the specified seconds for testing purpose.

--display=DISPLAY X display to use

You can still pass --cpu-mode=1 as a parameter. (Even being the default)

Also, make sure to pass --3d-engine=2 to use OpenGL instead of the Internal Rasterizer. (From what I know, even the Windows builds doesn't support D3D, so you have to use OpenGL)

Edited by Naughx

Share this post


Link to post
Share on other sites

That's the second super-heavy warning I've had to give out in this topic.

Here's a quick checklist of what's okay to post and what isn't:

Okay:

- Emulator discussion (that's DeSmuMe/No$GBA and its ilk)

- Where to find the translation patch itself

Not okay:

- Naming/linking a ROM site. This includes PMing this info, too.

If you really, REALLY want to argue about the Not Okay, stuff, feel free to shoot Tangerine a message. PMing me won't do squat, since I'm not the one in charge of the rules.

Share this post


Link to post
Share on other sites

Desmune works great for me. I played FE 12 on it and I am currently replaying it again on the same emulator with out a problem.

Share this post


Link to post
Share on other sites

No$GBA is one of the best DS GBA emulators. This emulator is different than the others is that it can be connected with other emulators, So you can play multi-player games with it. It can also work as Nintendo DS emulator as well. You can also check out more emulators here.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...